LED fluorescent lamp use efficiency analysis

Date:22-01-2018

Small size: LED is basically a very small chip is encap […]

Small size: LED is basically a very small chip is encapsulated in the epoxy inside, so it is very small, very light.
Low power consumption: LED power consumption is very low, in general, LED's operating voltage is 2-3.6V. Working current is 0.02A-0.03A. LED power consumption is incandescent 1/8, 1/3 of the traditional fluorescent lamp.
Long service life: at the right current and voltage, the service life of LED can reach 100,000 hours. Compared with other LED fluorescent tubes in the market, the light attenuation is reduced from 1000H10% to below 1000H5%. Automatic equipment production, after cooling technology processing, LED longer life.
High brightness: the use of wafer company's ultra-high brightness 3528 and 5060 patch made. Single LED brightness of more than 12LM
Environmental protection: LED is made of non-toxic materials, unlike fluorescent lamps containing mercury will cause pollution, while the LED can also be recycled. Can be lit for a long time, the product surface temperature <45 °, can be safely touched, the spectrum of no UV and infrared, that is, no heat, no radiation, can reduce emissions of carbon dioxide, sulfur dioxide and other harmful chemical components and reduce environmental pollution; DC power supply lighting, effectively improve the color rendering index of light RA ≥ 0.8, to maintain the authenticity of the color of the article being illuminated, to protect the human body's vision, is a typical green light source.
Energy-saving: DC drive, ultra-low power consumption, electro-optical conversion power of more than 95%. The same lighting efficiency than traditional fluorescent energy saving 70%.
Low-calorie: Traditional lamps will produce a lot of heat, while the LED lamps are more than 95% of the electrical energy converted to light, will not cause energy waste. And the documents, clothing will not produce fade phenomenon.
Supporting investment is small: As LED lighting with a minimum power of 5 times the power of lighting effects, its supporting small investment. No rectifier, low voltage, cold light will not cause a fire, the required wire size is also significantly lower than the current wire used in lighting specifications, due to the long life of LED lighting fixtures, the subsequent maintenance is also much smaller than the current traditional lamps
Rugged: LEDs are completely encapsulated in epoxy, which is stronger than bulbs and fluorescent tubes. There are no loose parts of the lamp body, these features make the LED can be said is not easy to damage.
Installation and easy to use: the user has a fluorescent stent, remove the starter or electronic ballast (ballast line cut off, both ends of the stent directly connected to 220V AC), international standards, can be installed in ordinary fluorescent stent . Newly installed users, with lamp holder directly installed, saving bracket.
Safety: low-voltage start, staged voltage design, the voltage range can be normal light, effectively prevent the voltage is too low or too high and affect the work, to adapt to different voltages around the world, high safety performance!
Advantages: Stripe-type high transmittance, does not glare; frosted light soft, and the traditional sunlight exactly the same light. Aluminum alloy heat dissipation, collision will not be fragmented, easy to transport.

http://www.gentwin.com/

All Copyright Reserved By Gentwin LED Lighting Co., Ltd       Designed by HWAQ        Sitemap

  • Bell.Lee

    • Whatsapp ID:
      +8613375731199

  • James.Wang

    • Whatsapp ID:
      +8618757386759

  • Gentwin Office

    • Whatsapp ID:
      +8618500038276

  • Top