Product inspection is divided into factory inspection and type inspection

Date:18-02-2019

Factory inspection 1 Each luminaire should be inspected […]

Factory inspection
1 Each luminaire should be inspected by the inspection department and issued a certificate of conformity before leaving the factory.
2 The factory inspection items are shown in Table 2; for the unqualified inspection items, the sampling should be doubled for inspection. The re-packaged delivery can only be repackaged. If the re-inspection is unqualified, the batch of products shall be unqualified; if other items are unqualified, they shall be repaired and may be delivered after passing the inspection.
3 type test
3.1 Type inspection shall be carried out in one of the following cases: a) Trial-type identification of new or old products to the factory; b) After formal production, if there are major changes in structure, materials and processes, it may affect product performance. c) When the product is discontinued for more than half a year, when the production is resumed; d) When the factory inspection result is significantly different from the previous type inspection; e) When the national quality supervision agency proposes the type inspection. 3.2 The type test sample is taken from the factory-qualified varieties, and 4 pieces are taken at a time. If the photoelectric performance of the lamp has unqualified items, it is judged as unqualified. If there are unqualified items in other projects, the samples should be doubled in the same batch of products, and the unqualified items should be re-examined. If the products are still unqualified, the type inspection is unqualified.

http://www.gentwin.com

All Copyright Reserved By Gentwin LED Lighting Co., Ltd       Designed by HWAQ        Sitemap

  • Bell.Lee

    • Whatsapp ID:
      +8613375731199

  • Gentwin Office

    • Whatsapp ID:
      +8618500038276

  • Top