Spotlight precautions and installation use

Date:03-04-2019

The floodlights are colorful, with good monochromaticit […]

The floodlights are colorful, with good monochromaticity, soft light, low power, long life and up to 50,000 hours of illumination. Moreover, the LED floodlight lamp body is small, easy to hide or install, is not easy to be damaged, has no heat radiation, and is beneficial to protect the object to be illuminated, and has a wide application range. The luminaires are equipped with scale plates for easy adjustment of the illumination angle.

Precautions
High-purity aluminum reflector, the most accurate beam, the best reflection effect, symmetrical narrow angle, wide angle and asymmetric light distribution system, open-type replacement bulb behind, easy maintenance lamps are equipped with a scale plate to adjust the illumination angle.

Installation and use
The floodlights can be installed in a single installation, or a combination of multiple lamps can be installed on a pole of 20 m or more to form a high pole lighting device. In addition to the beautiful appearance, centralized maintenance, reduced lamp pole and floor space, the biggest advantage of this device is its strong lighting function. When the light is projected from a high place, the spatial brightness of the environment is high, and the light coverage is large, giving a feeling of whiteness, so that the lighting quality and visual effect are high. To meet the minimum safety requirements for outdoor use, the perimeter of the floodlight should be IP × 3 (open). In order to improve the durability of the luminaire and reduce the maintenance workload, people pay more and more attention to the development of closed-type floodlights with high one-time investment cost, and the enclosure protection grade is IP55.
In order to further increase the light output ratio of the luminaire, the reflector tends to adopt a block surface reflector which is beneficial for reducing the light blocking of the light source and a multi-focus reflector which satisfies the special lighting requirements; the surface treatment of the reflecting surface tends to adopt new materials and new processes, Get a reflectance of over 96%.
In order to reduce the weight of the lamp and reduce the consumption of metal materials, the lamp housing will develop toward a high temperature resistant, high mechanical strength, anti-aging plastic casing.

http://www.gentwin.com

All Copyright Reserved By Gentwin LED Lighting Co., Ltd       Designed by HWAQ        Sitemap

  • Bell.Lee

    • Whatsapp ID:
      +8613375731199

  • Gentwin Office

    • Whatsapp ID:
      +8618500038276

  • Top