Thermal technology breakthrough

Date:03-09-2018

Most of the existing ceiling light lamps use finned alu […]

Most of the existing ceiling light lamps use finned aluminum as a heat sink. The heat dissipation effect of this heat sink is not ideal, and the heat sink usually reaches a higher temperature.

1. Breaking through the problem that the existing finned aluminum radiator has poor heat dissipation effect

Most of the existing ceiling light lamps use finned aluminum as a heat sink. The heat dissipation effect of this heat sink is not ideal, and the heat sink usually reaches a higher temperature.

2. Using insulating heat-dissipating plastic instead of aluminum alloy to make heat sink

An LED bio-thermal plastic that increases the heat radiation capability by 4-8 times while maintaining the heat dissipation capability and the aluminum alloy. The LED heat sink made of this heat dissipating material can greatly improve the overall heat dissipation effect.

3. Using liquid convection principle to provide a ceiling light with good heat dissipation performance

The heat absorbed from the lampshade by the coolant in the liquid storage tank installed on the lampshade, and the natural convection between the two liquid storage tanks of different heights by the coolant, the heat absorbed by the coolant from the lampshade is dissipated So that the lampshade of the ceiling light is well cooled.

www.gentwin.com

All Copyright Reserved By Gentwin LED Lighting Co., Ltd       Designed by HWAQ        Sitemap

  • Bell.Lee

    • Whatsapp ID:
      +8613375731199

  • Gentwin Office

    • Whatsapp ID:
      +8618500038276

  • Top